HVAC Installation Cost Guide (2026)

✓ Full Installation Benchmarks Complete System with New Ducts: $9,200 – $17,500 Updated: 2026

Installing an HVAC system from scratch (such as in new construction, major home additions, or converting a home without ductwork) typically costs between $9,200 and $17,500 for a standard 2,000 sq. ft. home.

Total Turnkey Installation Cost Components

Component / Project Phase Description Typical Cost Range
Heating & Cooling Hardware Outdoor condenser/heat pump and indoor furnace or air handler (3 Ton). $3,800 – $7,500
Complete Ductwork Installation Supply & return plenums, main trunk line, flex branch runs, ceiling boots, registers. $2,800 – $5,600
Mechanical Contractor Labor Two certified installers for 2 to 4 days (rough-in and trim-out). $2,400 – $4,200
Electrical Circuit & Disconnect Dedicated 240V whip, breaker in main panel, and outdoor service disconnect switch. $400 – $950
Permits, HERS & Pressure Testing Municipal building permit, rough inspection, and duct blaster leakage testing. $250 – $650
Total Turnkey Project Cost Complete operational whole-home heating & cooling system. $9,650 – $18,900

New Construction vs. Retrofitting an Existing Home

In new construction where wall studs and ceiling joists are open, duct installation proceeds quickly at $1.20 to $2.00 per square foot. Retrofitting ductwork into a finished, occupied home with finished drywall requires opening ceilings, routing chases through closets, and patching drywall, increasing ductwork expenses to $2.50 to $4.50+ per square foot.

Data Sources

  • ACCA Manual D: Residential Duct Systems.
  • RSMeans Construction Cost Data (Mechanical Divisions 23).